Main:Rp4440 Linux Load
From Servers4Linux
Getting Ready
Get Debian, burn Debian to CD. I used the hppa port of Debian 5.0.1.
Boot from Media
Put media in drive, boot from it.
Firmware Version 46.34
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 1000 MHz Active Functional 67108864 67108864
1 1000 MHz Idle Functional 67108864 67108864
Central Bus Speed (in MHz) : 200
Available Memory : 4194304 KB
Good Memory Required : Not initialized. Defaults to 32 MB.
Primary boot path: 0/1/1/0.1
Alternate boot path: 0/1/1/1.0
Console path: 0/0/1/1.0
Keyboard path: 0/0/4/0.0
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > sea
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
IODC
Path# Device Path (dec) Device Path (mnem) Device Type Rev
----- ----------------- ------------------ ----------- ----
P0 0/0/3/0.0 media.0 Random access media 1
P1 0/1/1/0.1 intscsia.1 Random access media 3
P2 0/1/1/1.0 intscsib.0 Random access media 3
Main Menu: Enter command or menu > bo p0
Interact with IPL (Y, N, or Cancel)?> n
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.14 root@penalosa Wed Oct 8 15:04:37 UTC 2008
Boot image contains:
0/vmlinux32 4182445 bytes @ 0x41af000
0/vmlinux64 5784545 bytes @ 0x3c2a800
0/ramdisk 5193263 bytes @ 0x372d800
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: ' console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 64-bit kernelELF64 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 3866624 mediaptr 0x1000
Segment 1 load 0050c000 size 354360 mediaptr 0x3b1000
Segment 2 load 00564000 size 274566 mediaptr 0x408000
Loading ramdisk 5193263 bytes @ 3fafb000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-parisc64 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Fri Mar 27 06:26:43 UTC 2009
[ 0.000000] FP[0] enabled: Rev 1 Model 20
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] console [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] model 00008940 00000491 00000000 00000002 3e127202fa63eaf3 100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000302
[ 0.000000] CPUID vers 20 rev 5 (0x00000285)
[ 0.000000] capabilities 0x35
[ 0.000000] model 9000/800/rp4440
[ 0.000000] parisc_cache_init: Only equivalent aliasing supported!
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
[ 0.000000] 1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB
[ 0.000000] Total Memory: 4094 MB
[ 0.000000] initrd: 7fafb000-7ffeee2f
[ 0.000000] initrd: reserving 3fafb000-3ffeee2f (mem_max ffe00000)
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 1033735
[ 0.000000] Kernel command line: console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[17179569.184000] Console: colour dummy device 160x64
[17179569.188000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[17179569.324000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[17179569.592000] Memory: 4109824k/4192256k available (2491k kernel code, 81728k reserved, 1236k data, 272k init)
[17179569.596000] virtual kernel memory layout:
[17179569.596000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[17179569.596000] memory : 0x0000000040000000 - 0x000000413fe00000 (266238 MB)
[17179569.596000] .init : 0x0000000040564000 - 0x00000000405a8000 ( 272 kB)
[17179569.596000] .data : 0x000000004036ee70 - 0x00000000404a4000 (1236 kB)
[17179569.596000] .text : 0x0000000040100000 - 0x000000004036ee70 (2491 kB)
[17179570.236000] Security Framework initialized
[17179570.236000] SELinux: Disabled at boot.
[17179570.284000] Capability LSM initialized
[17179570.284000] Mount-cache hash table entries: 256
[17179570.424000] Initializing cgroup subsys ns
[17179570.424000] Initializing cgroup subsys cpuacct
[17179570.560000] Initializing cgroup subsys devices
[17179570.560000] net_namespace: 1200 bytes
[17179570.560000] NET: Registered protocol family 16
[17179570.700000] EISA bus registered
[17179570.700000] Searching for devices...
[17179570.940000] Found devices:
[17179570.940000] 1. Mt. Hamilton Fast Mako+ at 0xfffffffffe780000 [128] { 0, 0x0, 0x894, 0x00004 }
[17179570.976000] 2. Mt. Hamilton Fast Mako+ at 0xfffffffffe781000 [129] { 0, 0x0, 0x894, 0x00004 }
[17179571.112000] 3. Everest Mako Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0af, 0x00009 }
[17179571.252000] 4. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x880, 0x0000c }
[17179571.252000] 5. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0, 0x783, 0x0000a }
[17179571.388000] 6. Mercury PCI Bridge at 0xfffffffffed22000 [0/1] { 13, 0x0, 0x783, 0x0000a }
[17179571.524000] 7. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0, 0x783, 0x0000a }
[17179571.664000] 8. Mercury PCI Bridge at 0xfffffffffed28000 [0/4] { 13, 0x0, 0x783, 0x0000a }
[17179571.804000] 9. Mercury PCI Bridge at 0xfffffffffed2a000 [0/5] { 13, 0x0, 0x783, 0x0000a }
[17179571.940000] 10. Mercury PCI Bridge at 0xfffffffffed2c000 [0/6] { 13, 0x0, 0x783, 0x0000a }
[17179572.080000] 11. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0, 0x004, 0x000c0 }
[17179572.080000] Enabling PDC_PAT chassis codes support v0.05
[17179572.912000] CONFIG_SMP=n ignoring additional CPUs
[17179572.912000] CPU: probe of 129 failed with error 1
[17179572.912000] CPU(s): 1 x PA8900 (Shortfin) at 999.787300 MHz
[17179572.928000] Setting cache flush threshold to 4000000 (1 CPUs online)
[17179572.956000] SBA found Pluto 2.3 at 0xfffffffffed00000
[17179573.056000] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000
[17179573.108000] Mercury version TR3.2 (0x32) found at 0xfffffffffed22000
[17179573.156000] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000
Firmware Version 46.34
Duplex Console IO Dependent Code (IODC) revision 1
Hmm. Linux starts to load, and then reboots. I never get to the Debian installer. Say tuned.
