Main:rx2620
From Servers4Linux
Contents |
Hardware Overview
Working on the Server
Adding RAM
Adding Processors
Adding a CPU is straightforward, but there's quite a few step. See this separate page on rx2620 CPU installation.
Adding Foo
Server Operations
Power On, Off
Getting Console
If you want to work on serial console, do this:
MP login: root
MP password: ********
Hewlett-Packard Integrated Lights-Out HP Integrity and HP 9000
(c) Copyright Hewlett-Packard Company 1999-2007. All Rights Reserved.
MP Host Name: ipf00-lom
Revision E.03.32
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Enter OS Session
HE: Main Help Menu
X: Exit Connection
[ipf00-lom] MP> co
(Use Ctrl-B to return to MP main menu.)
- - - - - - - - - - Prior Console Output - - - - - - - - - -
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
***********************************************************
* ROM Version : 04.29
* ROM Date : 11/30/2007
* BMC Version : 04.04
***********************************************************
0 0 0x0015B2 0x0000000014153749 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration
0 0 0x0015B2 0x0000000021773852 boot time event
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
3h
3h
EFI version 1.10 [14.62]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF server rx2620 5.48 [Thu Nov 10 15:08:03 2005] firmware by HP
Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.10
Loading 'SysROM:Floating-Point Software Assistance Handler'...
-- 'SysROM:Floating-Point Software Assistance Handler' returned Success
Loading 'SysROM:SCSI Bus Driver'...
-- 'SysROM:SCSI Bus Driver' returned Success
Loading 'SysROM:SCSI Tape Driver'...
-- 'SysROM:SCSI Tape Driver' returned Success
Loading device drivers
EFI Boot Manager ver 1.10 [14.62] OS might use only the primary console set via boot manager or conconfig command
/----------------------------------\ /----------------------------------\ | System Overview | | Boot Menu | | hp server rx2620 | | Red Hat Enterprise Linux Server | | Serial #: US45381658 | | CentOS 4.7 | | | | Smart Setup EBSU | | System Firmware: 4.29 [4748] | | EFI Shell [Built-in] | | BMC Version: 4.04 | | CD/DVD | | MP Version: E.03.32 | | Drive Explorer | | Installed Memory: 6144 MB | | ------------------------------- | | | | Boot Configuration | | CPU Logical | | System Configuration | | Module CPUs Speed Status | | Security Configuration | | 0 1 1.5 GHz Active | | | | | \----------------------------------/ | | | | | | | | \----------------------------------/
Use <^|v> to scroll <ENTER> to Select <ESC> or <X/x> for Previous Menu
Searching for devices
Scsi(Pun0,Lun0) COMPAQ BF1468A4CC HPB5 (320 MBytes/sec)
Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.62]
Device mapping table
fs0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig107C292C-19D7-41FE-9CDE-2A33A706D92C)
blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig107C292C-19D7-41FE-9CDE-2A33A706D92C)
blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,Sig629CC42E-C7E7-4416-B395-788808879306)
Shell> ?
List of classes of commands:
boot -- Booting options and disk-related commands
configuration -- Changing and retrieving system information
device -- Getting device, driver and handle information
memory -- Memory related commands
shell -- Basic shell navigation and customization
scripts -- EFI shell-script commands
Use 'help <class>' for a list of commands in that class
Use 'help <command>' for full documentation of a command
Use 'help -a' to display list of all commands
Shell> co
'co' not found
Exit status code: Invalid Parameter
Shell> configuration
'configuration' not found
Exit status code: Invalid Parameter
Shell> help configuration
Configuration commands:
cpuconfig -- Deconfigure or reconfigure cpus
date -- Displays the current date or sets the date in the system
err -- Displays or changes the error level
esiproc -- Make an ESI call
errdump -- View/Clear logs
info -- Display hardware information
monarch -- View or set the monarch processor
palproc -- Make a PAL call
salproc -- Make a SAL call
time -- Displays the current time or sets the time of the system
ver -- Displays the version information
Use 'help <command>' for full documentation of a command
Use 'help -a' to display list of all commands
Shell> help -a
alias - Displays, creates, or deletes aliases in the EFI shell
attrib - Displays or changes the attributes of files or directories
autoboot - View or set autoboot timeout variable
baud - Set serial port com settings
bcfg - Displays/modifies the driver/boot configuration
boottest - Set/View BootTest bits
cd - Displays or changes the current directory
cls - Clears the standard output with an optional background color
comp - Compares the contents of two files
conconfig - Configure console devices
connect - Binds an EFI driver to a device and starts the driver
cp - Copies one or more files/directories to another location
cpuconfig - Deconfigure or reconfigure cpus
date - Displays the current date or sets the date in the system
dblk - Displays the contents of blocks from a block device
dbprofile - Set up, remove or copy direct boot profiles
default - Sets, Resets, or Clears default NVM values
devices - Displays the list of devices being managed by EFI drivers
devtree - Displays the tree of devices that follow the EFI Driver Model
dh - Displays the handles in the EFI environment
disconnect - Disconnects one or more drivers from a device
dmem - Displays the contents of memory
dmpstore - Displays all NVRAM variables
drivers - Displays the list of drivers that follow the EFI Driver Model
drvcfg - Invokes the Driver Configuration Protocol
drvdiag - Invokes the Driver Diagnostics Protocol
echo - Displays messages or turns command echoing on or off
edit - Edits an ASCII or UNICODE file in full screen
EfiCompress - Compress a file
EfiDecompress - Decompress a file
err - Displays or changes the error level
errdump - View/Clear logs
esiproc - Make an ESI call
exit - Exits the EFI Shell
for - Executes commands for each item in a set of items
fwconfig - View / Select system firmware image
getmtc - Displays the current monotonic counter value
goto - Makes batch file execution jump to another location
guid - Displays all the GUIDs in the EFI environment
help - Displays help menus, command list, or verbose help of a command
hexedit - Edits with hex mode in full screen
if - Executes commands in specified conditions
info - Display hardware information
ioconfig - Deconfigure or reconfigure IO components or settings
lanaddress - Display LAN MAC addresses
lanboot - Performs boot over LAN from EFI Shell
load - Loads and optionally connected EFI drivers
LoadPciRom - Loads a PCI Option ROM
ls - Displays a list of files and subdirectories in a directory
map - Displays or defines mappings
memmap - Displays the memory map
mkdir - Creates one or more directories
mm - Displays or modifies MEM/IO/PCI
mode - Displays or changes the mode of the console output device
monarch - View or set the monarch processor
mount - Mounts a file system on a block device
mv - Moves one or more files/directories to destination
openinfo - Displays the protocols on a handle and the agents
optload - Lists all optional ROM-based efi drivers and applications
PalProc - Make a PAL call
pause - Prints a message and suspends for keyboard input
pci - Displays PCI devices or PCI function configuration space
pdt - View or set page deallocation table
reconnect - Reconnects one or more drivers from a device
reset - Resets the system
rm - Deletes one or more files or directories
SalProc - Make a SAL call
secconfig - View / Configure system security features
set - Displays, creates, changes or deletes EFI environment variables
setsize - Sets the size of the file
stall - Stalls the processor for some microseconds
tftp - Tftp to a bootp/dhcp enabled unix boot server
time - Displays the current time or sets the time of the system
touch - Updates time with current time
type - Displays the contents of a file
unload - Unloads a protocol image
ver - Displays the version information
Verbose - Controls progress output on console
vol - Displays volume information of the file system
xchar - Turn on/off extended character features
Use 'help <command>' for full documentation of a command
Use 'help -a -b' to display list of commands one screen at a time
Shell> conconfig
CONSOLE CONFIGURATION
Index Primary Type Device Path
----- ------- ----- ----------
1 NC Serial Acpi(PNP0501,0)
2 S Serial Acpi(HWP0002,700)/Pci(1|1)
3 P VGA Acpi(HWP0002,700)/Pci(2|0)
Shell> conconfig 2 p
Invalid Parameter
Usage: CONCONFIG [index] [on | off | primary]
index Specifies index of console to set as primary
on Enables the specified console as a secondary console
off Puts console into 'Not Configured' (NC) state
primary Sets the specified console as primary
Shell> conconfig 2 primary
CONSOLE CONFIGURATION
Index Primary Type Device Path
----- ------- ----- ----------
1 NC Serial Acpi(PNP0501,0)
2 P Serial Acpi(HWP0002,700)/Pci(1|1)
3 S VGA Acpi(HWP0002,700)/Pci(2|0)
Shell> help -a
alias - Displays, creates, or deletes aliases in the EFI shell
attrib - Displays or changes the attributes of files or directories
autoboot - View or set autoboot timeout variable
baud - Set serial port com settings
bcfg - Displays/modifies the driver/boot configuration
boottest - Set/View BootTest bits
cd - Displays or changes the current directory
cls - Clears the standard output with an optional background color
comp - Compares the contents of two files
conconfig - Configure console devices
connect - Binds an EFI driver to a device and starts the driver
cp - Copies one or more files/directories to another location
cpuconfig - Deconfigure or reconfigure cpus
date - Displays the current date or sets the date in the system
dblk - Displays the contents of blocks from a block device
dbprofile - Set up, remove or copy direct boot profiles
default - Sets, Resets, or Clears default NVM values
devices - Displays the list of devices being managed by EFI drivers
devtree - Displays the tree of devices that follow the EFI Driver Model
dh - Displays the handles in the EFI environment
disconnect - Disconnects one or more drivers from a device
dmem - Displays the contents of memory
dmpstore - Displays all NVRAM variables
drivers - Displays the list of drivers that follow the EFI Driver Model
drvcfg - Invokes the Driver Configuration Protocol
drvdiag - Invokes the Driver Diagnostics Protocol
echo - Displays messages or turns command echoing on or off
edit - Edits an ASCII or UNICODE file in full screen
EfiCompress - Compress a file
EfiDecompress - Decompress a file
err - Displays or changes the error level
errdump - View/Clear logs
esiproc - Make an ESI call
exit - Exits the EFI Shell
for - Executes commands for each item in a set of items
fwconfig - View / Select system firmware image
getmtc - Displays the current monotonic counter value
goto - Makes batch file execution jump to another location
guid - Displays all the GUIDs in the EFI environment
help - Displays help menus, command list, or verbose help of a command
hexedit - Edits with hex mode in full screen
if - Executes commands in specified conditions
info - Display hardware information
ioconfig - Deconfigure or reconfigure IO components or settings
lanaddress - Display LAN MAC addresses
lanboot - Performs boot over LAN from EFI Shell
load - Loads and optionally connected EFI drivers
LoadPciRom - Loads a PCI Option ROM
ls - Displays a list of files and subdirectories in a directory
map - Displays or defines mappings
memmap - Displays the memory map
mkdir - Creates one or more directories
mm - Displays or modifies MEM/IO/PCI
mode - Displays or changes the mode of the console output device
monarch - View or set the monarch processor
mount - Mounts a file system on a block device
mv - Moves one or more files/directories to destination
openinfo - Displays the protocols on a handle and the agents
optload - Lists all optional ROM-based efi drivers and applications
PalProc - Make a PAL call
pause - Prints a message and suspends for keyboard input
pci - Displays PCI devices or PCI function configuration space
pdt - View or set page deallocation table
reconnect - Reconnects one or more drivers from a device
reset - Resets the system
rm - Deletes one or more files or directories
SalProc - Make a SAL call
secconfig - View / Configure system security features
set - Displays, creates, changes or deletes EFI environment variables
setsize - Sets the size of the file
stall - Stalls the processor for some microseconds
tftp - Tftp to a bootp/dhcp enabled unix boot server
time - Displays the current time or sets the time of the system
touch - Updates time with current time
type - Displays the contents of a file
unload - Unloads a protocol image
ver - Displays the version information
Verbose - Controls progress output on console
vol - Displays volume information of the file system
xchar - Turn on/off extended character features
Use 'help <command>' for full documentation of a command
Use 'help -a -b' to display list of commands one screen at a time
Shell> exit
EFI Boot Manager ver 1.10 [14.62] OS might use only the primary console set via boot manager or conconfig command
/----------------------------------\ /----------------------------------\ | System Overview | | Boot Menu | | hp server rx2620 | | Red Hat Enterprise Linux Server | | Serial #: US45381658 | | CentOS 4.7 | | | | Smart Setup EBSU | | System Firmware: 4.29 [4748] | | EFI Shell [Built-in] | | BMC Version: 4.04 | | CD/DVD | | MP Version: E.03.32 | | Drive Explorer | | Installed Memory: 6144 MB | | ------------------------------- | | | | Boot Configuration | | CPU Logical | | System Configuration | | Module CPUs Speed Status | | Security Configuration | | 0 1 1.5 GHz Active | | | | | \----------------------------------/ | | | | | | | | \----------------------------------/
Use ^ and v to change option(s). Use Enter to select an option
Working with BIOS
Setting a Boot Device
Loading Linux
More here soon...
